Rockwell Automation 6189V-512MDDR2 Memory Modules - Manual (Page 4)

4 Memory Modules
Publication 6177R-IN003B-EN-P - November 2009
Before You Begin
Review the specifications of a new component before installing it to make sure it is
compatible with the computer. Record the model and serial number, and any other pertinent
information of new components for future reference.
Required Tools
These tools are required for installing a memory module.
• #2 Phillips screwdriver
• Antistatic wrist strap
• Scissors (for cutting cable ties)
Pre-installation Procedure
Perform this pre-installation procedure before removing the side cover and/or accessing a
hardware component.
1. Turn off the computer and all the peripherals connected to it.
2. Disconnect power from the computer to avoid exposure to high energy levels.
If necessary, label each one to expedite reassembly.
3. Disconnect telecommunication cables to avoid exposure to shock hazards from
ringing voltages.
ATTENTION
To avoid voiding your product warranty, use only Rockwell Automation
Allen-Bradley-approved replacement parts and accessories
.
IMPORTANT When installing hardware requiring access to internal components, we
recommended that you first back up all computer data to avoid loss.
ATTENTION
Make sure to read and understand the entire installation/removal
procedure first, before you begin configuring the computer hardware.