Rockwell Automation 2364E INST Air Flow Switch PCB and Pwr Sup Replacement - Manual

Publication 2300-5.12 - April 1998
R EPLACEMENT K IT I NSTRUCTIONS
Air Flow Switch PCB and Power Supply
Replacement
Contents This publication contains the necessary procedures to replace an air
flow switch PCB and the air flow switch power supply.
What This Kit Contains Using the table below, verify that you have received the appropriate
items:
Other Items Needed Before you begin, be sure you also have the following:
• Whatever tool(s) you will need to:
• Disconnect and connect wiring
• Remove, loosen, and tighten screws (including terminal
screws)
• Documentation:
• Your drive system schematics
• Your product’s user/installation manual
For this part: You should receive this quantity:
air flow switch PCB 1
air flow switch power supply 1