Rockwell Automation 2098-UWCPRG Ultraware Installation Instructions - Manual (Page 2)

2 Ultraware Installation Instructions
Publication 2098-IN002B-EN-P — April 2004
Installing Ultraware
Your Ultraware software comes on a single CD ROM disc. The software is
a self-installing executable file that you load on your computer’s hard
disk. When you insert the Ultraware CD ROM disc in your computer’s CD
ROM drive, the installation process automatically begins if your computer
is configured for CD ROM autorun. If the installation does not run
automatically, you will need to follow the procedures for manual
installation.
Automatic Installation
To automatically install Ultraware from the CD ROM:
1. Start Windows.
2. Insert the Ultraware CD ROM disc in the CD ROM drive. The
installation process automatically runs.
3. Follow the instructions shown on the installation program windows to
complete the installation process.
Unless you change the default path, Ultraware files are placed in the
following path:
C:\Program Files\Rockwell Automation\Ultraware