Rockwell Automation 2198-KITCON-DSL Kinetix 5500 Feedback Connector Kit Installation Instructions - Manual (Page 2)

Publication 2198-IN002A-EN-P - September 2012
Copyright © 2012 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.
Allen-Bradley, Kinetix, Rockwell Software, and Rockwell Automation are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Connector Plug Installed and Housing Assembled
Specifications
Connector Data
Pin numbering corresponds to the Kinetix 5500 drive MF (2-pin) feedback connector.
Feedback (2-pin) Connector Plug
IMPORTANT Cable preparation and positioning that provides a high-frequency bond between shield braid
and grounding plate is required to optimize system performance.
Attribute 2198-KITCON-DSL
Connector plug wire size 0.5 mm 2 (22 AWG)
Recommended wire strip length 8 mm (0.31 in.) single conductor
Recommended torque
Mounting screws
Cover screws 0.4 N•m (3.5 lb•in)
0.4 N•m (3.5 lb•in)
Drive Pin Kit Pin Signal Wire Label Wire Color
MF-1 1 D+ EPWR+ Blue
MF-2 2 D- EPWR- White
Mounting
Screws (2)
Feedback Cable
EPWR+, EPWR-
Cover
Connector
Plug
Housing Cover
Screws (2)
Housing cover tab slides behind mating feature.