Rockwell Automation 7000 Ferrite Torroid Assembly Instructions User Manual
Ferrite torroid assembly, Installation instructions
Advertising
Publication 7000-IN011A-EN-P - April 2012
Installation Instructions
Ferrite Torroid Assembly
1. Open Ferrite Bead.
Figure 1 - Ferrite Bead Opened
2. Loop the ethernet patchcord around itself once, ensuring the loop is large
enough to fit the length of the Ferrite bead.
Figure 2 - Looped patchcord
IMPORTANT
The loop must be close to the end of the Ethernet patchcord that plugs into the
Ethernet Switch.
Advertising