Rockwell Automation 2364 Bus Indicator PCB Replacement - Manual

Publication 2364-5.13 - April 1998
R EPLACEMENT K IT I NSTRUCTIONS
Bulletin 2364 Bus Indicator PCB
Replacement
Contents This publication contains the necessary procedures to replace the bus
indicator PCB.
What This Kit Contains Using the table below, verify that you have received the appropriate
items in your kit:
Other Items Needed Before you begin, be sure you also have the following:
• Whatever tool(s) you will need to:
• Remove, loosen, and tighten 6-32 nuts
• Documentation:
• Your drive system schematics
• Your product’s user/installation manual
For this part: You should receive this quantity:
bus indicator PCB 1