Rockwell Automation 2097-MEM Memory Module Installation Instructions - Manual

Installation Instructions
Bulletin 2097 Memory Module
Catalog Number 2097-MEM
About the Memory Module
The 2097-MEM memory module is used with
Kinetix® 300 and Kinetix 350 servo drives. The
memory module uses EEPROM technology in a
plastic casing for protection and ruggedness to
safe-guard your application parameters.
Install
1. Verify that MEM port pins are straight and
memory module receptacles are free of
obstructions.
2. Align the spline on the memory module
with the notch in the MEM port and press
into place.
Remove
Use a small pair of needle nose pliers to gently grasp
the module by the indents and pull.
Item Description
1 Kinetix 300 drive
2 MEM port
3 2097-MEM memory module
Front View Rear View
1
2
3