Rockwell Automation 2080-LC30-10QWB_10QVB Micro830 10 Point Programmable Controllers - Manual (Page 14)

14 Micro830 10 Point Programmable Controllers
Publication 2080-IN002B-EN-P - April 2014
Insulation stripping
length 7 mm (0.28 in.)
Enclosure type rating Meets IP20
North American temp
code T4
(1) Use this Conductor Category information for planning conductor routing. Refer to Industrial Automation
Wiring and Grounding Guidelines, publication
1770-4.1 .
Input Specifications
Attribute High-speed DC input
(Inputs 0…3) Standard DC input
(inputs 4 and higher)
Number of inputs 4 2
Input group to
backplane isolation Verified by one of the following dielectric tests: 1,414V DC for 2 s
75V DC working voltage (IEC Class 2 reinforced insulation)
Voltage category 24V DC sink/source
Off-state voltage, max 5V DC
On-state voltage range 16.8…26.4V DC @ 65°C (149°F)
16.8…30.0V DC @ 30°C (86°F) 10…26.4V DC @ 65°C (149°F)
10…30.0V DC @ 30°C (86°F)
Off-state current, max 1.5 mA
On-state current, min 5.0 mA @ 16.8V DC 1.8 mA @ 10V DC
On-state current, nom 7.6 mA @ 24V DC 6.15 mA @ 24V DC
On-state current, max 12.0 mA @ 30V DC
Nominal impedance 3 k Ω 3.74 k Ω
IEC input compatibility Type 3
AC input filter setting 8 ms for all embedded inputs
In Connected Components Workbench, go to the Embedded I/O
configuration window to reconfigure the filter setting for each
input group.
Output Specifications
Attribute 2080-LC30-10QWB 2080-LC30-10QVB
Relay Output High-Speed Output
(Outputs 0…1) Standard Output
(Outputs 2…3)
Number of outputs 4 2 2
General Specifications
Attribute 2080-LC30-10QWB 2080-LC30-10QVB