Black & Decker BT1400 - Manual (Page 32)

TROUBLE! DOES NOT MAKE ACCURATE MITER CUTS
WHAT’S WRONG? WHAT TO DO…
1. Miter scale not adjusted 1. Check and adjust
correctly
2. Blade is not square to 2. Check and adjust
fence
3. Workpiece moving 3. Clamp workpiece to
fence or glue 120 grit
sandpaper to fence
with rubber cement
TROUBLE! MATERIAL PINCHES BLADE
WHAT’S WRONG? WHAT TO DO…
1. Cutting bowed material 1. Position bowed material
as shown in Figure 11
SERVICE INFORMATION
All Black & Decker Service Centers are staffed with
trained personnel to provide customers with efficient
and reliable power tool service.
Whether you need technical advice, repair, or genuine
factory replacement parts, contact the Black & Decker
location nearest you.
Accessories
CAUTION: The use of any non-recommended
accessory such as dado sets, molding cutters or
abrasive wheels may be hazardous.
Specifications
BT1400 AR B2 B3 B2C BR
Voltage 220V 220V 120V 220V 127V
Frequency 50Hz 60Hz 60Hz 50Hz 60Hz
Power 1500W 1500W 1500W 1500W 1500W
Printed in China
7/06/07