Launch rslinx communication drivers via rslinx, Launch rslinx communication drivers via rslinx on – Rockwell Automation 9303 Drive Tools SP / Drive Executive Installation User Manual
Page 4
www.rockwellautomation.com
Americas: Rockwell Automation, 1201 South Second Street, Milwaukee, WI 53204 USA, Tel: (1) 414.382.2000, Fax: (1) 414.382.4444
Europe/Middle East/Africa: Rockwell Automation, Vorstlaan/Boulevard du Souverain 36, 1170 Brussels, Belgium, Tel: (32) 2 663 0600, Fax: (32) 2 663 0640
Asia Pacific: Rockwell Automation, Level 14, Core F, Cyberport 3, 100 Cyberport Road, Hong Kong, Tel: (852) 2887 4788, Fax: (852) 2508 1846
Power, Control and Information Solutions Headquarters
U.S. Allen-Bradley Drives Technical Support - Tel: (1) 262.512.8176, Fax: (1) 262.512.2222, Email: [email protected], Online: www.ab.com/support/abdrives
Publication 9303-IN001A-EN-P – January, 2009
Copyright © 2009 Rockwell Automation, Inc. All rights reserved. Printed in USA.
c.
Enter the following parameters in the configuration dialog box:
d.
Click OK to close the dialog box.
5.
Add other drivers as desired.
Launch RSLinx Communication Drivers via RSLinx
1.
From the Windows® Start menu, select Programs > Rockwell Software >
RSLinx > RSLinx.
2.
In the RSLinx program menus, select Communications > Configure Drivers
to open the Configure Drivers dialog box. (The Configure Drivers dialog box,
provides a list of previously configured drivers and their status.) Note: For
directions on adding, editing, and deleting RSLinx drivers, click Help.
3.
To add a Serial Driver for Connecting to a 1203-USB, 1203-SSS, or
22-SCM-232 Adapter:
a.
From the Configure Drivers dialog box, select the RS-232 DF1 devices
driver from the Available Drivers list.
b.
Click Add New. The configuration dialog box for that driver displays.
c.
Enter the following parameters in the configuration dialog box:
d.
Click OK to close the dialog box.
4.
Add other drivers as desired.
Comm Port:
Comm port on your PC
Device:
1770-KF2/1785-KE/SCANport
Baud Rate:
Baud Rate of the Adapter
Station Number:
00
Parity:
None
Error Checking:
BCC
Stop Bits:
1
Protocol:
Full Duplex
Comm Port:
Comm port on your PC
Device:
1770-KF2/1785-KE/SCANport
Baud Rate:
Baud Rate of the Adapter
Station Number:
00
Parity:
None
Error Checking:
BCC
Stop Bits:
1
Protocol:
Full Duplex