Top mounting, Bottom mounting – Rockwell Automation 2755-NB40, -NB41 AdaptaScan Wiring Base User Manual

Page 3

Advertising

Catalog No. 2755-NB40, -NB41

Worksheet

AdaptaScan Wiring Bases

Top Mounting

The wiring base mounts from the top to any flat surface with three #10 or M5
mounting screws. The screw heads must be less than 3/8 inch in diameter
allowing them to fit inside the mounting hole. The length of the mounting
screws must be 1/2 inch (12.5 mm) plus the depth the screw penetrates the
mounting surface.

A full size mounting template (No. 40062–310–01) is provided with the
wiring base. Use the following diagram for reference.

ООООООООООООО

Scan Beam

3 Holes

Top Mounting Holes

4.46 Inches

(113 mm)

2.65 Inches

(67 mm)

2.79 Inches

(71 mm)

Bottom Mounting

The wiring base mounts from the bottom to any flat surface with three
mounting screws. The holes on the U.S. version have #10-32 UNF-2B
threads. The holes on the metric version have M5 x .8 threads. The length
of the screws must not be greater than 1/2 inch (12.5 mm) plus the thickness
of the mounting surface.

A full size mounting template (No. 40062–310–01) is provided with the
wiring base. Use the following diagram for reference.

ОООООО

Wiring Base Has Three
Threaded Mountng Holes

4.46 Inches

(113 mm)

2.65 Inches

(67 mm)

2.79 Inches

(71 mm)

ББ

Scan Beam

3 Holes
.6 inch (15 mm) deep

Thread Size of Holes

#10-32 UNF-2B
M5 x .8

U.S.

Metric

Advertising

Popular Brands

Popular manuals