Rockwell Automation 2090-CPBM7DF-04AAxx Standard Power Cables with Circular DIN Connector Type 958 Installation Instruct - Manual (Page 5)

Standard Power Cables with Circular DIN Connector Type 958 5
Publication 2090-IN024A-EN-P - September 2010
5. Tighten the threaded plug five or six turns to fully seat the contacts and secure the
connection.
Connector Pinout Diagrams
The diagram provides wire colors and pinouts for the standard power cables.
2090-CPBM7DF-xxAAxx
(1) Wire gauge and connector keying varies based on motor and power requirements. Refer to Kinetix Motion Control Selection
Guide, publication
GMC-SG001 , for additional information.
(2) The Protective Earth (PE) power wire also may be labelled Ground (GND).
IMPORTANT The internal O-ring dampens the effects of vibration at the connection.
This creates a more secure connection with the motor connector.
(2)
(1)
(1)
(1)
(1)
Brown
Black
Blue
Green/Yellow
White
Black
Shield
U
V
W
MBRK+
MBRK-
U
V
W
MBRK+
MBRK-
360°
shield-to-ground
connections
required.
To
Motor
Connector
Backshell
Shielded
360°
Shield
Wire Connection
To
Drive
Twisted Wire Pair