Rockwell Automation 2090-CPxxx Standard Power Cables with SpeedTec DIN Connector Type 940 Installation Instruct - Manual (Page 7)

Standard Power Cables with SpeedTec DIN Connector Type 940 7
Publication 2090-IN023A-EN-P - September 2010
Specifications
Additional specifications for each cable are available in the Kinetix Motion Control Selection
Guide
, publication GMC-SG001 .
2090-CPBM7DF-xxAAxx Specifications
2090-CPWM7DF-xxAAxx Specifications
Attribute Value
Wire Size 10 AWG 8 AWG 6 AWG
Diameter 16.8 mm (0.66 in.) 20 mm (0.79 in.) 24.3 mm (0.96 in.)
Bend Radius 170 mm (7.0 in.) 200 mm (8.0 in.) 245 mm (9.5 in.)
Installation Areas (1)
(1) The installation areas are approximately 300 mm (12 in.) in length at both ends of the cable. Secure this area with a rigid
mount that prevents the cable from flexing where it connects to other components.
Attribute Value
Wire Size 10 AWG 8 AWG
Diameter 15.3 mm (0.6 in.) 18.8 mm (0.74 in.)
Bend Radius 150 mm (6.0 in.) 190 mm (7.5 in.)
Installation Areas (1)
(1) The installation areas are approximately 300 mm (12 in.) in length at both ends of the cable.
Secure this area with a rigid mount that prevents the cable from flexing where it connects to
other components.