Rockwell Automation 6180 Processor Board (for 6180 Industrial Computers) - Manual (Page 12)

Chapter
2
Processor Board
This chapter describes components of the processor board and the
system BIOS which configures system components. Topics include:
•
access, installation and removal of board components
•
system BIOS
•
processor board components
•
front panel connectors
•
configuration jumpers
Installation and removal of the processor board is described in the
6180 Industrial Computer User Manual.
To access the processor board, you will need to remove the back
cover. You may also have to remove other boards. See the 6180
Industrial Computer User Manual.
The Basic Input / Output System (BIOS) is a set of instructions for
the processor board stored in Read Only Memory (ROM). These
instructions allow the processor board to interact with the other
boards and hardware that make up a 6180 Computer. Chapter 3 tells
how to use the Setup program to configure the BIOS.
Chapter Objectives
Access, Installation,
and Removal of Board
System BIOS