Rockwell Automation 2361 Gate Interface Board Replacement User Manual
2361 gate interface board replacement
R
EPLACEMENT
K
IT
I
NSTRUCTIONS
2361 Gate Interface Board Replacement
(for 1250, 1650, and 3000A 1395 DC Drives)
Contents
This document shows how to remove and replace a gate interface
board in a 1250, 1650, or 3000A 1395 DC drive.
What This Kit Contains
Using the table below, verify that you have received the appropriate
items in your kit:
Other Items Needed
Before you begin, be sure you also have the following:
•
Tools needed for:
•
Measuring voltage (multimeter)
•
Removing, loosening, and tightening screws (slotted
screwdriver and a small screwdriver for terminals)
•
Documentation:
•
Your drive system schematics
•
Publication 1395-5.40, Bulletin 1395 Digital DC Drive–
User Manual
•
Publication 2361-5.01, Bulletin 1395 Digital DC Drive in
Bulletin 2361 Motor Control Center for Drive Systems–
User Manual
For this part:
You should receive this quantity:
gate interface board
1