Rockwell Automation 7000 PowerFlex Medium Voltage Line Filter Capacitors - For b/o ICAR Capacitors - Manual (Page 7)

Rockwell Automation Publication 7000-IN009C-EN-P - January 2014 6
Handling, Inspection, and Storage of Medium Voltage Line Filter Capacitors
Figure 4 - Capacitor Shipping Crate with Top Cover Removed.
If the capacitors are damaged:
• note the exact damage on the bill of lading
• take photographs of the damage
• retain the packaging
1. For customers in North America:
– Contact Rockwell Automation Medium Voltage Components
immediately, by calling 519-740-4790 (option 2) or e-mail
[email protected] .
2. For customers outside of North America:
– Contact your local Rockwell Automation office immediately.
Store the damaged crate and capacitors where they will not be disturbed until you
receive instructions from Rockwell Automation.
If requested by Rockwell Automation, please return the damaged LFC to the
factory using the same shipping crate for the replacement LFCs.
If the capacitors are not damaged:
1. Verify that the capacitors contain three phase labels (2U, 2V, 2W) and a
rating label.
2. Verify that the part number printed on the rating label on the side of the
capacitor(s) matches the capacitor part number(s) printed in the Part
Number list in the Back Ordered Parts section on the Back Order
Notification form (CSP-2490-215-ss). See Figure 1. For replacement
capacitors, typically the part numbers are 80026-511-xx.
IMPORTANT The porcelain bushings at the top of the capacitors are fragile. Any force
applied to the bushings could damage the seal between the bushing and the
capacitor body causing potential chipping of the bushing or capacitor leaks.