Rockwell Automation 2711-NL2_NL3_NL4 Display Backlight - Manual (Page 4)

4 PanelView Display Backlight
Publication 2711-IN042C-EN-P - July 2007
3. Open the back of the PanelView terminal by swinging the unit open about
90°.
4. Unplug the backlight power supply cable and remove it from the molded
cable retainers (not present on PV600 terminal) on the backlight reflector
and set aside.
5. Remove the four Phillips-head screws and remove the backlight.
Avoid touching exposed
electronic components.
Backlight Cable Retainers
Backlight Power
Supply Cable
PanelView 900/1000 Terminal
Backlight Power Supply Cable
PanelView 600 Terminal
(4) M4 Phillips-head
Screws
Backlight Cable
Retainers
(4) M4 Phillips-head
Screws
(4) M4 Phillips-head
Screws
(4) M4 Phillips-head
Screws
(4) M4 Phillips-head
Screws