Rockwell Automation 2100 CENTERLINE Motor Control Centers Installing or Removing External Auxiliary Cont - Manual (Page 2)

2100-IN004A-US-P - September 1999
2 CENTERLINE® Motor Control Centers Installing or Removing External Auxiliary Contacts
Figure 1
Removal Refer to Figure 2 and use the following steps to remove external auxiliary
contacts:
1. Make sure that all power has been disconnected.
2. Unwire auxiliary contact.
3. Push object into hole to disengage auxiliary contact tab.
4. Grasp auxiliary contact with needle nose pliers and pull out.
!
ATTENTION: De-energize all power sources before
installing or removing external auxiliary contacts. Failure
to de-energize all power sources can result in severe
injury or death.
External auxiliary
contact
Auxiliary
contact adapter
Parts List
External auxiliary contact