Rockwell Automation T3446H ICS Regent Relay Output Modules - Manual (Page 15)

(T3446L, H) Relay Output Modules
P D - 6 0 1 7 M a r - 0 6
15
1) Set the Module Type:
Position the cursor on the module slot you wish to define.
Choose Set Module Type from the Edit Menu and select
the relay output module from the list.
2) Edit the Module Definition:
Choose Edit Module Definition from the Edit Menu. A
dialog box will open where you can define the output point
definitions.
Figure 9. Relay Output Module Definition.
3) Edit each point:
Choose Edit from the Module Definition dialog box to
define a name and description for each output point. In
the Digital Output Point dialog, enter names and values
for the configuration fields as described below.
Figure 10. Defining a Digital Output Point.