Rockwell Automation 20D PowerFlex 700H and 700S AC Drives Frame 9 Main Fan Capacitor Replacement Kit User Manual
Page 7
Rockwell Automation Publication PFLEX-IN024B-EN-P - September 2011
7
PowerFlex 700H and 700S AC Drives Frame 9 Main Fan Capacitor Replacement Kit
8. Remove the two M4 x 16 mm POZIDRIV screws that secure the stirring
fan to the bracket and remove the fan. Save the fan for reuse. Discard the
two M4 x 16 mm screws -- new hardware is provided in the kit.
9. Remove the two M4 x 8 mm POZIRDRIV screws that secure the fuse
holder to the bracket and remove the fuse holder. Save the fuseholder for
reuse. Discard the two M4 x 8 mm screws -- new hardware is provided in
the kit.
10. Discard the existing fan capacitor and bracket.
IMPORTANT
Note the orientation of the air flow direction arrow on the fan
housing before removal. The fan must be installed facing the
same direction when re-installed.
Remove screws and stirring fan.
Note direction of air flow arrow.
Remove screws and fuse holder