Rockwell Automation Flex/WebPak 3000 DC Drive Inverting Fault CB Kit 1.5-30HP-230VAC, 3-60HP-460VAC - Manual (Page 3)

Inverting Fault Circuit Breaker Kit for FlexPak 3000 and WebPak 3000 Drives 3
Mounting the Inverting Fault Circuit Breaker Kit
Step 1. Disconnect, tag, and lock out power to the drive.
Step 2. Drill the mounting holes (4.6 mm diameter) for the circuit breaker mounting plate using the mounting
hole pattern shown in Figure 1.
Step 3. Mount the circuit breaker and the plate assembly with the four M5 self-tapping screws provided with
the kit.
Figure 1 – Inverting Fault Circuit Breaker Mounting Hole Pattern