Rockwell Automation T8141 Trusted Demonstration Unit - Manual

Trusted TM
PD-T8141
Issue 1 Feb 06 PD-T8141 1
Trusted
TM
Demonstration Unit
Introduction
The Trusted TM Demonstration Unit T8141 provides a portable Simulation system utilising the Trusted TM
Chassis, TMR Processor and Modules available from the standard product range together with a
purpose built panel for the supply of field simulation input and output signals.
The unit offers the ability to run any Trusted TM software configuration and simulate a selection of I/O
types configured for Companion slot. The unit is suitable for sales demonstrations, product
familiarisation for engineers, training courses and to simulate IEC1131 Trusted
TM Toolset programs
including development of application programs.
For shipping worldwide to customer locations, the unit is fitted within a wheeled flight case allowing
easy transit and set up on arrival. It does not require assembly other than fitting the power lead and
TC-304-01 Comms link to a suitable PC installed with the Trusted
TM Toolset T8082B.
Once powered and connected to the PC either a demo program is loaded to utilise the field simulation
I/O or the unit can be used as a tool to run a “real” application.
Typical configuration for training and demonstration purposes is a TMR Processor, Communications
Interface Module, Digital Input and Output Modules, Analogue Input Modules, with at least two of a
similar type to demonstrate “Hot Swap” capability.
Companion slot hoods may be removed from the chassis to allow connection of any cable or Interface
Adaptor type and associated modules.
Features
• Full Trusted TM Controller Capability
• 100-240Vac Input
• Portable wheeled flight case
• Simulation of 60 Field Signals
• Pre wired Dual Ethernet (point to point and hub)
• Serial Comms wired to terminals
• Configured for Companion Slot DI, AI and DO modules
• Fully Compliant with All Trusted
TM Software Packages
• Field Faults Simulated