Rockwell Automation 1440-TB-C XM-942 Master Relay Terminal Base - Manual (Page 15)

XM-942 Master Relay Terminal Base 15
Publication GMSI10-IN022A-EN-P - May 2010
Wiring
Terminal Assignments
IMPORTANT
For more wiring connection information, refer to the XM
Module User Guide.
WARNING
EXPLOSION HAZARD
Do not disconnect equipment unless power has been removed
or the area is known to be nonhazardous.
Do not disconnect connections to this equipment unless power
has been removed or the area is known to be nonhazardous.
Secure any external connections that mate to this equipment by
using screws, sliding latches, threaded connectors, or other
means provided with this product.
ATTENTION
The terminal block assignments are different for different
terminal base units. The following table applies only to the
XM-942. Refer to the installation instructions for the specific
terminal base unit for its terminal assignments.
No. Description No. Description
0 24V in 26 No connection
1 24V common 27 Relay 3 common contact 1
2 Reset relay 28 Relay 4 common contact 2
3 Reserved 29 Relay 4 common contact 1
4 Relay 1 N.O. contact 2 30 No connection