Rockwell Automation T812X Trusted Processor Interface Adaptor Module - Manual (Page 2)

SDS-T812X
Trusted
TM Industrial Control System
Trusted TM Processor Interface Adaptor - T812X
ICS Triplex Technical data sheets are intended for
information and guidance. The Company
has a policy of continual product
development an improvement.
Specifications are subject to change
without notice. For latest information, visit
our Website:-
www.icstriplex.com
ASSEMBLY LAYOUT
ELECTRICAL SPECIFICATION
Serial Ports
Active and Standby
1-off RS485
2-off RS422/485
Connections
Active and Standby
1-off fault/fail
1-off diagnostic
1-off PSU shutdown monitor
1-off IRIG B (122 and 002 on the same
connector)
AVAILABLE OPTIONS
T8120 Basic Module
T8121 IRIG-B
T8122 Modbus Master
T8123 IRIG-B and Modbus Master
MECHANICAL
SPECIFICATION
Dimensions (HxWxD):
138mm x 120mm x
108mm
(5.43ins x 4.72ins x
4.25ins)
Weight:
877gms
(1.93lbs)
ENVIROMENTAL
Operating Temperature:
-5
°C to 60°C
(23 °F to 140°F)
Operating Humidity:
5 to 95%, non-
condensing
Vibration:
10 to 57Hz
±0.075mm
57 to 150Hz 1.0g
Shock:
15g, ½ sine wave, 11ms
EMI (IEC 801):
ESD
Air discharge to 15kV
Contact discharge to 8kV
Radiated Fields
10V/m, 27MHz to
500MHz
Transients and Bursts
2kV, 2.5kHz for
t=60 seconds