Rockwell Automation T3833 ICS Regent Math Package for Winterpret - Manual (Page 21)

Math Package for W INTERPRET (T3833)
P D - 6 0 4 3 M a r c h , 0 6
21
Normally you will use the Floating Point Math Monitor
Window to observe results of the floating point math
calculations. You can also select a single line and display the
values of all the variables used in the selected line.
File Menu
The File Menu provides access to several commands common
to all function block monitors. These include View Function
Block Details, View Function Block Description, Log Off and
Exit. For descriptions of these commands see Commands
Common to all Function Block Monitors in Section 7, Loading
Monitoring and Testing Application Programs in the Regent
User’s Guide.
Control Menu
The Control Menu provides certain command that are
common to all function block monitors. These include Run,
Stop and Scan commands to control the execution status of
the entire application program. For descriptions of these
commands see Commands Common to all Function Block
Monitors in Section 7, Loading Monitoring and Testing
Application Programs in the Regent User’s Guide.
Additionally the Control Menu provides a Line Details
command used specifically for monitoring floating point math
function blocks.
Line Details
This command opens a dialog box which displays the status of
all variables in the currently selected line. The status of the
error variables are also shown in the Line Details dialog.