Rockwell Automation PDC24 / PAC Chassis Power Supplies - Manual (Page 7)

PDC24 / PAC October 2005 – Issue 3 7
Triguard SC300E PDC24 / PAC Chassis Power Supplies
Test connector
The 8-way 270º DIN socket located on the front panel. The connector pinout details are given in
Table 2-2.
Table 2-2. Test connector pinouts
PIN Signal
1 5V return at SMPS
2 12V +ve output at SMPS
3 5V +ve output at SMPS
4 +5V return at backplane
5 Power share line
6 5V supply –ve sense
7 5V supply +ve sense
8 Power fail interrupt
Figure 2-2 Test connector pin number location