Rockwell Automation T8200 Trusted High Integrity Power Supply - Manual

SDS-8200
Trusted
TM Industrial Control System
Trusted TM High Integrity Power Supply-T8200
Issue 6 Jan 2006
FRONT PANEL
DESCRIPTION
The Trusted
TM High Integrity Power Supply is designed to convert main line
voltages of either 110V ac/240V dc, or 24V dc to +15V dc or 24V dc output
power for ICS product power requirements.
The power supply assembly consists of a power supply chassis containing
up to six 250W power modules. Each of these power modules can be
selected to operate from either single or dual power sources. The power
supply chassis can be configured to provide different output power
combinations. These can range from six independent 250W supplies,
through a fully redundant 750W supply to a 1250W N+1 unit with dual power
feeds.
The power supply chassis may be mounted in a 19-inch rack or flush
mounted on a panel. The table below identifies the available types of
chassis.
Catalogue No. Chassis Unit Input Voltage
T8200 I/O Power Supply Chassis 110-240V ac, 50/60 Hz
T8201 I/O Power Supply Chassis 110-240V ac, 50/60 Hz
T8202 I/O Power Supply Chassis 24V dc
The power supply assembly modules are single (if redundant inputs are not
required) and dual input, hot swap, user-replaceable ac and dc units. The
table below identifies the available types of modules.
Catalogue No. Input Type Input Voltage Output Voltage
T8220 Dual 110-240V ac 15V dc
T8222 Dual 24V dc 15V dc
T8223 Single 110-240V ac 24V dc
T8224 Single 110-240V ac 15 V dc
T8225 Dual 110-240V ac 24V dc
T8226 Dual 24V dc 24V dc
FEATURES
Redundant power inputs
1500W
Hot replaceable power
modules
Current sharing
Constant current limiting
Power factor correction
Front panel indicators for
input/output voltage status,
and output current level on
each module
External status signals
provided
Direct replacement for
Regent I/O Power Supply
Chassis T3500, T3501 and
T3502 using modules
supplying 15V dc (T8220,
T8222 and T8224)