Rockwell Automation Liquiflo AC Drive Panel Mount Kit, M/N 41L4060, Model Number 41L4060PM - Manual

Panel Mount Kit for LiquiFlo AC Drives M/N 41L4060 1
Panel Mount Kit
for LiquiFlo AC Drives
M/N 41L4060
Model Number 41L4060PM
Instruction Manual D2-3460
Product Description
This instruction manual describes how to install an optional panel mount kit on B-frame LiquiFlo AC drives,
M/N 41L4060. The kit comprises items that make panel mounting of a LiquiFlo AC drive safer and easier. Each
kit includes bus bar jumpers, pressure lugs, hose assemblies, and the necessary mounting hardware.
Verifying Kit Contents
Panel mount kit M/N 41L4060PM can be used only with B-frame LiquiFlo AC drives, M/N 41L4060. Kit contents
are listed in table 1, and are indicated by circled item numbers in figure 1.
!
ATTENTION: Only qualified personnel familiar with the construction and operation of this
equipment and the hazards involved should install, adjust, operate, and/or service this equipment.
Read and understand this instruction manual in its entirety before proceeding. Failure to observe
this precaution could result in severe bodily injury or loss of life.
Table 1 – Panel Mount Kit Contents
Item Description Qty Part Number
1 Jumper Bus Bar “R”, “S”, “T” 3 179359
2 Pressure Lug, (2) 300 MCM - 6 AWG 6 179440
3 5/16“ Flat Washer, 1” OD, .344” ID, Gr.5 18 601748-26A
4 1/4-20 Hex Nut/Conical Washer 6 401599-11E
5 1/4-20 HHCS Screw, UNC x 1.50 Lg, Gr.5 6 173809
6 5/16-18 Hex Nut/Conical Washer 3 401599-11F
7 5/16-18 HHCS Screw, UNC-2A x 1.25 Lg, Gr.5 3 114581
8 Insulation, 2.0” Dia., 4.00” Lg. 6 417901-51ASX
9 Cable Tie, Nylon, 11.5” Lg. 12 108578
10 Inlet Hose Assembly, Back Mount 1 179383
11 Outlet Hose Assembly, Back Mount 1 179401
12 Tube Support Bracket, Back Mount 2 179411
13 #10 Spacer, 1/4” Lg. 4 600856-22L
14 Flat Head Screw, Phillips, #10-32 UNC-2A x 1.00” Lg. 4 179438-Q01
15 Self-tapping Screw, 1/4-20 x .50” Lg. 8 601741-65B
16 Tube Assembly, Side Mount 2 179442
17 Tube Support Bracket, with Grommet, Side Mount 4 179453