Rockwell Automation SP600 REBZL-N1 Bezel Kit - Manual (Page 2)

Copyright ©2006 Ro ckwell Automation, Inc. All Rights Reserved. Printed in USA.
Publication D2-3562 - June 2006
(1) The bezel’s lower DPI port is always Port 2, and the cradle connection port is always Port 3.
For the drive to receive its speed reference from:
• The OIM in the bezel, set parameter Speed Ref A Sel (90) or Speed Ref B Sel (93), depending on your
application requirements, to “20” (DPI Port 3).
• A remote OIM connected directly into Port 2 on the bottom of the drive, set parameter Speed Ref A Sel (90) or
parameter Speed Ref B Sel (93) to “19” (DPI Port 2).
No. Connector Port ID Description
➊
Internal Connection -- Connects the REBZL-N1 Bezel Kit to the drive.
➋
Lower DPI Port
(1) Port 2 Connects a RECOMM-232 or RECOMM-USB converter to
the drive.
➌
Cradle Connection
(1) Port 3 Connects the OIM to the bezel.
➊
➋
➌