Rockwell Automation TC300 Trusted Communications Cables - Manual (Page 21)

Trusted
TM
Communication Cables TC300
Issue 13 Oct 11 PD-TC300 21
12. Communications Cable Type TC-322-02
This type of Communications Cable is shown in Figure 13 below.
Figure 13 Communications Cable Type TC-322-02
This type of Trusted TM Communications Cable is designed to connect communications between a
Trusted TM Expander Interface module T8311 and a 8161 SC300e Bridge Module in a SC300e
Triguard chassis or a 8162 CS300 Bridge Module in a CS300 chassis. This creates a system with a
Trusted
TM processor (and other Trusted TM modules) and Triguard or CS300 I/O modules.
The cable is fitted with two 12-way round connectors. At the Trusted TM end, the connector fits a socket
on the T8312 Interface Adapter, which mounts on the Trusted TM chassis behind the P8311 Expander
Interface. At the Triguard or CS300 end, the right-angled connector fits an interface card supplied with
the cable, which fits the three PCB header connectors on the Triguard or CS300 chassis backplane.
For more information, please refer to PD-8161 and PD-8162
The Cable is manufactured from two lengths of 8 way screened cable shrouded in Vidaflex sheathing.
The ends of the sheathing are taken inside a bend relief cable boot at each end.