Rockwell Automation 1440-REX00-04RD XM-441 Expansion Relay Module - Manual (Page 20)

Rockwell Automation Publication GMSI10-UM019C-EN-P - June 2011
20 Installing the XM-441 Expansion Relay Module
Figure 2.5 XM-942 Terminal Base Unit
Terminal Block Assignments
The terminal block assignments and descriptions for the XM-441 module are
shown below.
XM-943, Cat. No. 1440-TB-D
ATTENTION
The terminal block assignments are different for different
XM modules. The following table applies only to the
XM-441. Refer to the installation instructions for the
specific XM module for its terminal assignments.
WARNING
EXPLOSION HAZARD
Do not disconnect equipment unless power has been
removed or the area is known to be nonhazardous.
Do not disconnect connections to this equipment unless
power has been removed or the area is known to be
nonhazardous. Secure any external connections that mate
to this equipment by using screws, sliding latches, threaded
connectors, or other means provided with this product.
Terminal Assignments
No. Name Description
0 No Connection
1 No Connection
2 No Connection
3 Reserved
4 Relay 1 N.O. 2 Relay #1 Normally Open contact 2
5 Relay 1 N.O. 1 Relay #1 Normally Open contact 1
6 Relay 2 N.O. 2 Relay # 2 Normally Open contact 2
7 No Connection