Rockwell Automation SP600 DPI Screw Terminal Adapter Kits - Manual

© 2005 Rockwell Automation. All rights
DPI Screw Terminal Adapter Kits
Instruction Sheet D2-3545
The DPI Screw Terminal Adapter Kits can be used with SP600 and GV6000 AC Drives.
Items Included in Each Kit
Important: A cable sold by Quabbin (p/n 2906), or equivalent, has been tested and is recommended for use
with the Adapter-Only Kit (Catalog # 1202-TB-KIT-SET). The Quabbin cable is an equivalent to the
cable supplied in the Full Kit (Catalog # 1202-CBL-KIT-100M) except that it has different wire pair
colors (see Table 1on back page) and a foil shield.
DPI Cable Requirements/Recommendations
1. The maximum cable distance between a DPI peripheral and DPI host is:
• 75 meters with 500 kbps DPI data rate
• 100 meters with 125 kbps DPI data rate
2. The maxium DPI cable length is the SUM of all connected cables between the drive and the peripheral(s).
This includes all cables connected via the DPI Screw Terminal cable and RECBL-SSP splitter cable.
3. The installer must follow common system wiring practices and route cables away from sources of EMI,
such as drive input power and motor cables.
Full Kit
Catalog # 1202-CBL-KIT-100M
Adapter-Only Kit
Catalog # 1202-TB-KIT-SET
Qty. Item Description Qty. Item Description
2 8-pin MiniDIN-to-Screw Terminal Adapter 2 8-pin MiniDIN-to-Screw Terminal Adapter
1 Mini-screwdriver (fits screw terminals) 1 Installation Instructions (D2-3545)
1 Wire Strip Tool (for stripping 26 AWG wire ends) Note: The Adapter-Only Kit is provided so additional
cable assemblies can be made with the 100 meter cable
supplied in the Full Kit. It can also be used by customers
that already have the tools and purchase their cable
separately.
100 m Cable (26 AWG x 4 twisted and shielded pairs)
1 Installation Instructions (D2-3545)
Screw Terminal
Cable Adapter RE4ALCD
REBZL-N1
6VKYPD-N4 RE4ALCD
REBZL-N1
6VKYPD-N4
RECBL-SSP
Splitter Cable
49.25 m 49.25 m
DPI @ 125 kbps
0.3 m
0.3 m 0.3 m 0.3 m 0.3 m
Example
Screw Terminal
Cable Adapter