Rockwell Automation T7836 ICS Regent+Plus PDS to Winternet Conversion Package - Manual (Page 4)

PDS to W INTERPRET Conversion Package (T7836)
4
I n d u s t r i a l C o n t r o l S e r v i c e s
PDS2WIN Version 1.0
Translator program converting files from PDS versions 2.6
to 2.9x to Winterpret source files.
NOTE: Support for Continuous Control and Peer to Peer
are not provided.
Enter the full path name including drive letter for the
PDS directory.
>> c:\pds293
Enter the full path name including drive letter for the
Winterpret system directory. Press ENTER to accept the
default location of c:\winterp.
>> c:\winterp
Enter the project name receiving the converted files.
>> proj293
Enter the user name for project and program ownership.
>> ALL
Creating project files...
ok
Converting the I/O configuration...
ok
Converting shared variables...
ok
Converting function block files...
converting (function block name)
converting (function block name)
.
.
.
ok
Converting program files...
converting (program name)
converting (program name)
.
.
.
ok
Successful translation.
Conversion complete.
Figure 1. Messages Displayed by PDS2WIN.
When PDS2WIN fails to convert a file, "failed" is displayed in
place of "ok". Conversion errors terminate the program.