Rockwell Automation T8030S Trusted OPC Server Package - Manual (Page 17)

Trusted
TM
OPC T8030S
Issue 23 April 10 PD-T8030S 17
2.4. Configuring the OPC Server
Since the server runs as a Windows service it has no direct user interface. A separate program
OPCServerConfig, supplied with the installation, allows the user to configure the server. This program
is installed in the same directory as the OPC, e.g. Trusted/OPC.
2.4.1. Logging On
Before the server can be configured, the user must be logged on. This is done by choosing File |
Login or pressing the logon button shown above. After a user name and password is correctly
entered, the user has full access to the server’s functions.
The default username is “USERNAME”, and the default password is “PASSWORD”. Note that the
password must be entered in capitals and that the program does not automatically convert to capitals.
The user names may be changed, and additional users configured by choosing the Users tab once the
default user has been logged in.
Figure 4 Login Window
Figure 5 Users Tab