Rockwell Automation T8891 Trusted Speed Monitor OFTA (SOFTA) - Manual (Page 12)

Trusted
TM
Speed Monitor OFTA T8891
Issue 2 Mar 07 PD-T8891 12
3.2. Over-speed Trip - Field Output (SK2)
This connector provides the volt free contact field connections for the over-speed trip output.
NOTE: Over-current protection for the field load must be provided externally.
Pin Signal Name Description
1 Over-speed Normally Closed Contact A
2 Over-speed Normally Closed Contact B
Over-speed trip output.
Normally closed contacts (shutdown state)
3 Over-speed Normally Open Contact A
4 Over-speed Normally Open Contact B
Over-speed trip output.
Normally open contacts (shutdown state)
Table 3 Over-speed Trip Field Output Connector (SK2)
3.3. Over-acceleration Trip - Field Output (SK3)
This connector provides the volt free contact field connections for the over-acceleration trip output.
NOTE: Over-current protection for the field load must be provided externally.
Pin Signal Name Description
1 Over-acceleration Normally Closed Contact A
2 Over-acceleration Normally Closed Contact B
Over-acceleration trip output.
Normally closed contacts (shutdown state)
3 Over-acceleration Normally Open Contact A
4 Over-acceleration Normally Open Contact B
Over-acceleration trip output.
Normally open contacts (shutdown state)
Table 4 Over-acceleration Trip Field Output Connector (SK3)