Rockwell Automation MinPak Plus DC Drive Field Supply Kit for RG 14C238 User Manual
Product description
Reliance and MinPak are trademarks of Rockwell Automation.
© 1998 Rockwell International Corporation
Field Supply Kit
for Regenerative MinPak Plus DC Drives
Model Number 14C238
Instruction Manual D2-3381
Product Description
The Field Supply kit provides field excitation for shunt-wound DC motors used with 1/4 to 1-1/2 HP
regenerative MinPak™ Plus DC drives. The kit is an assembly consisting of a terminal block, a field power
cube, two wiring harnesses, a support bracket, and mounting hardware.
The user must provide appropriate Field Supply wiring to the motor, based upon the motor’s field rating.
The contents of the Field Supply kit are listed in table 1.
!
ATTENTION: Only qualified electrical personnel familiar with the construction and operation of
this equipment and the hazards involved should install, adjust, operate, and/or service this
equipment. Read and understand this manual and other applicable manuals in their entirety
before proceeding. Failure to observe this precaution could result in severe bodily injury or loss
of life.
Table 1 – Contents of the Field Supply Kit
Description
Quantity
Part Number
Field Supply Power Cube
1
701819-12AD
Terminal Block 3TB
1
69351-102RB
Support Bracket
1
608885-14B
Wire Harness 51/52
1
608813-81S
Wire Jumper F1
1
608808-53TD
Wire Jumper F2
1
608808-53TE
Instruction Manual
1
D2-3381