Bang & Olufsen BeoVision 3-32 - User Guide - Manual (Page 28)

28
Edit tuned TV channels
You can make adjustments to your
tuned TV channels at any time, or
tune in channels not stored during
auto tuning.
You can also enter settings before
you tune in channels. These may
include choosing a broadcast system
for certain types of channels, or
setting up a connected decoder to be
switched on automatically whenever
a coded channel is switched on.
In addition, you can edit your list of
channels by renaming channels,
moving them around in the list, or
deleting all your unwanted channels
from the TV list, thereby reducing the
time you spend changing channels.
Adjust tuned TV channels
You can store TV channels on program
numbers of their own. Fine tune the channel
reception, indicate the presence of coded
channels and choose appropriate sound types
for the individual channels.
If the item ‘System’ appears on the menu, then
make sure that the correct broadcast system is
displayed before you start tuning:
B/G… for PAL/SECAM B/G
I… for PAL I
L… for SECAM L
M… for NTSC
D/K… for PAL/SECAM D/K
All options may not be available, as this depends
on the television type.
*If your television is not equipped with the
optional system modulator or set to Option 6, the
TV tuning menu appears automatically.
> Press MENU to bring up the main menu.
> Press 3 to bring up the Setup menu.
> Press GO to bring up the Tuning menu.
> …if necessary press GO again to bring up the
TV tuning menu.
> Press 4 to bring up the Manual tuning menu.
> Press l or n to move between items on the
menu and m or p to view your choices for each
item. Pressing m when the cursor is placed on
Freq (frequency) starts automatic search for a
channel. Numeric values can be entered using
the number keys on Beo4. When entering
names, press m or p to reveal the character you
want. Then press n to move to the next
character position.
> To view more options, press n to move the
cursor to More and press GO. If you set the item
Decoder to On, Dec1 or Dec2, you can return to
the previous menu to start tuning in coded
channels by pressing
GO.
> When a channel is tuned in, you can also select
the sound system you want; press m or p to
switch between the sound modes currently
transmitted or fine tune the channel.
> Press GO when you have entered your settings,
or…
> …press EXIT to leave all menus without storing.
TV tuning
1 Edit TV list
2 Add program
3 Auto tuning
4 Manual tuning
Freq Pr Name
210 1 . . . . . . . . More
Fine Decoder Sound
0 Off Stereo-2