Bang & Olufsen BeoVision 3-32 - User Guide - Manual (Page 43)

43
You can connect different types of
audio and video equipment to your
television, such as a video tape
recorder, set-top box or Camcorder.
Audio equipment is connected
through the Master Link socket.
When connecting video equipment
to your television, remember to use
the AV socket on the television first,
if it is vacant. Should you require
further information about
connections, refer to the CD-rom.
Refer to the guides included with
your additional equipment to make
sure it is connected properly.
Remember to register all connected
equipment. For further information
refer to the chapter ‘Register and use
additional video equipment’ on page
32.
Audio Master
Using a BeoLink cable, connect the one multi-
pin plug to the socket marked MASTER LINK
on your television, and the other multi-pin
plug to the socket marked MASTER LINK on
the audio system.
AV 2 Expander
The optional AV 2 Expander accessory is a
SCART expander for connection of
non-Bang & Olufsen equipment, such as
decoders, game consoles, and cameras to the
DECODER socket on your television. Use a 21-
pin cable to connect one plug to the socket
marked TV on the Expander box, and connect
the other plug to the socket marked
DECODER on the television. Remote control
operation of equipment connected via the
AV 2 Expander is not possible.
Set-top box
Use the 21-pin AV cable to connect the set-top
box to your television. To enable remote
control of your set-top box with the Beo4
remote control, you must also connect a low-
power IR transmitter.
Decoder
To connect an AV decoder (a baseband
decoder, such as Canal+), connect the cable
from the aerial to the television. Connect the
AV decoder to the 21-pin socket marked
DECODER on the television.
To connect an RF decoder, connect the
external aerial cable to the decoder input
socket and then forward the cable to the
television aerial socket (marked VHF/UHF).
Connect the RF decoder to the 21-pin socket
marked DECODER on the television.
Video tape recorder
Use a 21-pin cable to connect a BeoCord
V 8000 video tape recorder to the V.TAPE
socket on your television. Connect the cable
from the aerial to the input socket on the
video tape recorder. Forward the aerial cable
to the aerial socket on the television.
DVD player
Use a 21-pin cable to connect a DVD player,
such as a Bang & Olufsen DVD 1, to the
television. Connect one end to the socket
marked AV on your DVD player and the other
to the socket marked AV on the television.
Connect the socket marked DIGITAL OUTPUT
on DVD 1 to the INPUT 1 socket on the
television. If the required cable is not
enclosed, it is available from your Bang &
Olufsen retailer.
Game console, Camcorder, etc.
We recommend that you use the close-up
socket panel for equipment you connect on a
temporary basis, such as a game console or
Camcorder. These sockets are placed on the
left side of the television. The use of these
sockets is explained in the chapter ‘Close up
socket panel’ on page 48.
Connect additional equipment