Bang & Olufsen BeoVision 3-32 - User Guide - Manual (Page 45)

45
AV and aerial socket panel
V.TAPE
21-pin socket for the connection of a BeoCord
V 8000 video tape recorder.
AV
21-pin socket for the AV connection of other
equipment, such as a set-top box or a second
decoder (do not connect baseband decoders
here).
DECODER
21-pin socket for the connection of a
secondary set-top box or a primary decoder.
The socket provides the opportunity to
connect either an AV decoder or an RF
decoder.
The socket may be used for an AV 2 Expander
instead, which gives the opportunity to
connect a decoder or other non-Bang &
Olufsen auxiliary video equipment at the
same time.
MASTER LINK
Socket for connection of a compatible Bang &
Olufsen audio system.
The socket is also used for BeoLink
distribution of sound throughout the house.
LINK
Aerial output socket for distribution of video
signals to other rooms. (Only available if the
television is equipped with the optional
system modulator).
VHF/UHF
Aerial input socket from your external aerial
or cable TV network.
ATTN. ON/OFF
Aerial signal attenuator. Options are:
OFF: Normal setting
ON: Signals damped
IR OUTPUT
For connection of a set-top box.
Other sockets on the rear
~
Connection to the mains.
STAND
For connection of a motorised stand or base.
CARD
For future use.
DECODER
MASTER LINK
AV V.TAPE
IR-OUTPUT
VHF/UHF
75 Ω
LINK
ATTN.
OFF ON
STAND CARD