Bang & Olufsen BeoVision MX_4200 - User Guide - Manual (Page 27)

27
TV RECORD
NOW
TELETEXT
RECORD LIST
MENU
SOURCE
PROGRAM
START
TIME
back select GO
TV RECORD
PROGRAM 18 BBC
START TIME 15:40
STOP TIME 16:40
DATE 7 MAY
PDC / VPS OFF
store GO
TV RECORD
NOW
TELETEXT
RECORD LIST
MENU
back select GO
20:00-21:00 TV3
SUPER CH
. .
RECORD LIST
20:00-21:00 TV 3
SUPER CH FRI 7 MAY
TALK SHOW SAT 110
SKY SUN 15 SEP
20:00-22:00 RADIO 15
MEJRUP FRI 7 APR
delete
edit
GO
Insert a tape for recording…
> Press TV to switch on the television.
> Press RECORD to bring up the TV RECORD
menu.
> Press ▼ to move to TELETEXT and press GO.
> Find the teletext page you want.
> Press RECORD to be able to select a programme
to record, or use tt to move to REC on the
teletext menu bar and press GO.
> Press ▲ or ▼ to move to the start time or the
actual programme title.
> Press GO to select the chosen start time or
simply select the programme title.
> If necessary, press GO to select the stop time,
you can change the stop time by pressing ▼
and include two or three programmes in a row.
> Check the status line for the recording, if
necessary use ▲ or ▼ or the number buttons to
change and ss or tt to move between the
entered data.
> Press GO to store the timed recording.
PROGRAMMING STORED indicates that your
recording is stored.
You can also bring up the menu for making a
Timer recording via the main SETUP menu for the
relevant source, such as TV, or the main SETUP
menu for V.TAPE.
Insert a tape ready for recording…
> Press TV to switch on the television or SAT to
switch on a set-top box, if available.
> Press RECORD on Beo4 to bring up the
recording menu.
> Press ▼ until MENU is highlighted.
> Press GO to bring up the menu for setting a
timed recording. START TIME is highlighted.
> Use the number buttons or ss or tt to enter
information for your timed recording; stop time,
date, different program number if necessary,
and activate the PDC / VPS function if available.
> Press ▲ or ▼ to step from option to option.
> Press GO to store the recording.
> Press ▲ to back up through previous menus or
press EXIT to exit all menus directly.
If PDC / VPS is an option on the menu, then you
can set it to OFF or AUTO. The option you choose
will be valid for this particular recording only. For
further information about the PDC and VPS
systems and recording, refer to the BeoCord
V 8000 Guide.
> Press RECORD to bring up the recording menu.
> Press ▼ until RECORD LIST is highlighted.
> Press GO to bring up the list of recordings.
> Press ▼ or ▲ to highlight a recording.
To edit a highlighted recording…
> Press GO to be able to edit the recording.
> Press ss or tt to change start and stop times,
date or program number.
> Press ▼ or ▲ to step through the options.
> Press GO to store the recording and return to
the list.
To delete a highlighted recording…
> Press the yellow button to delete the recording.
> Press the yellow button again to confirm, or
press ss to move it back into the list.
> Select another recording to delete, or press EXIT
to exit all menus.
Overlapping recordings are indicated by OVERLAP.
A red dot indicates which recordings overlap.
Record via on-screen menu
Use the menu to set a timed recording. Enter
the start and stop times for your recording
and check that the entries are correct. You can
make up to 6 timed recordings.
Check the recordings already set
You can check the recordings that are waiting
to be executed, as well as edit or delete them.
If the timed recordings overlap, this is
indicated when the recording is stored and
shown in the list of recordings.