Bang & Olufsen BeoVision MX_4200 - User Guide - Manual (Page 30)

30
First-time setup of your television
The setup procedure described here
is activated only when the television
is connected to the mains and
switched on for the first time.
This procedure involves menu
language selection, automatic tuning
of TV programs, determination of
the centre position for the motorised
wall bracket – if your television is
equipped with one – and registration
of any extra equipment you have
connected.
The menu language setup appears. If you wish to
change the menu language at a later date, you
can find the item under OPTIONS in the TV SETUP
menu.
> Press TV to switch on the television. The
language menu appears.
> Press ▲ or ▼ to move between the displayed
languages, if necessary.
> Press GO to store your choice.
Select menu language
The first time you switch on your television,
you must select which language you want all
the menus to be displayed in.
MENU LANGUAGE
select accept GO
DANSK
DEUTSCH
ENGLISH
ESPAÑOL
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
When the menu for auto tuning appears, the
prompt CHECK AERIAL CONNECTION appears to
remind you to check that your TV aerial is properly
connected.
> Press GO to start auto tuning. The television
tunes in all available programs.
Store all programs and settings
When you have selected the menu language,
a menu for program tuning automatically
appears on the screen.
TV
AUTO TUNE
start
CHECK AERIAL CONNECTION