Bang & Olufsen BeoSound 3 - User Guide - Manual (Page 10)

Make a Wake-up Timer
The Wake-up Timer is a once-only Timer, and must be programmed each
time you wish to use it.
> While the system is in standby, press TIMER. The time for the latest
Wake-up Timer is shown in the display. The digits blink.
> Press or to find the time you want the system to start playing.
Press and hold or to step quickly to the desired time.
> Press the button of the source you want to use for your Wake-up
Timer; RADIO or A MEM. ‘Pr’ (for a radio program) or ‘A’ (for A MEM)
is shown in the display. If you do not choose a source, the radio is used.
> Press STORE to store the Wake-up Timer. The time for the Wake-up
Timer is briefly shown in the display.
Check or delete a Wake-up Timer
> While the system is in standby, press TIMER. The time for the Wake-up
Timer blinks in the display.
> Press STORE to confirm your Wake-up Timer, or…
> …press DELETE to delete the Wake-up Timer. ‘-.--’ is shown briefly in
the display.
Snooze
You can activate a snooze function when a Wake-up Timer switches on
the radio or starts memory card playback. Pressing any button or turning
the wheel within the first ten seconds switches off the system for ten
minutes, after which the Wake-up Timer is executed once more. You can
activate the snooze function as many times as you like.
To be able to make a Wake-up Timer, you must first set the clock as
described on page 15.
>> Daily use
10