Bang & Olufsen BeoSound 3 - User Guide - Manual (Page 6)

>> Introducing your Bang & Olufsen music system
Information in the display
The display keeps you informed about the source you have chosen and
the state of the system. The types of information that can appear in the
display are shown below:
Radio program number 13 is playing.
Radio frequency.
Folder number 12 on the memory card is playing.
Track number 2 in folder 12 on the memory card is
playing.
Playback is stopped.
Current volume setting.
Speakers are muted.
Number of minutes for a Stop Timer.
Current time.
The system is in standby.
The memory card reader is empty, or the memory card
is damaged.
Time has not been set.
6
Change the display mode at any
time. The system remembers your
settings.
– Press and hold RADIO to switch
between displaying the program
number and the radio frequency.
– Press and hold A MEM to switch
between displaying source/folder
and folder/track while playing
memory card tracks.
Pr 13
88.9
A 12
12. 2
A - -
32
- -
45
20.15
.
LOAD
- -.- -