Bang & Olufsen BeoSound 3 - User Guide - Manual (Page 8)

Play tracks from a memory card
Your music system can play music tracks in mp3 and wma format in the
first level of folders on a memory card. Tracks in the root level or in sub-
folders will not be played. Music can be copied to the memory card via
your computer or, for example, the BeoSound 4. Tracks are played back
on BeoSound 3 in the order they were copied to the memory card, not
alphabetically or otherwise. If you copy several tracks to the memory
card via Windows, playback may appear to be random.
NOTE: Never remove the memory card while playing from it.
Start playback…
> Load a memory card as shown.
> Press
A MEM to start playback. Unless you have loaded a new card,
the track you last listened to is played. If you have loaded a new card,
the first track in the first folder is played.
Stop playback…
> Press
STOP to stop playback. ‘A - -’ is shown in the display.
> Press GO or A MEM to resume playback. If you do not resume
playback within ten minutes, the system switches to standby.
Step through tracks…
> Press or to step through tracks in the current folder. While
stepping through tracks, the current folder and track are shown in the
display.
> Press and hold or to step rapidly between tracks.
>> Daily use
8
Only MultiMedia (MMC) and
Secure Digital (SD) cards from
SanDisk are supported by
BeoSound 3.