Bang & Olufsen BeoLink Passive - Setting-up Guide - Manual (Page 2)

WARNING: To prevent fire or electric
shock, do not expose this appliance
to rain or moisture. Do not expose
this equipment to dripping or splash-
ing and ensure that no objects filled
with liquids, such as vases, are placed
on the equipment.
To completely disconnect this equip-
ment from the AC Mains, disconnect
the power supply cord plug from the
AC receptacle.
This symbol indicates that a
dangerous voltage constitut-
ing a risk of electric shock is
present within this unit.
This symbol indicates that there
are important operating and
maintenance instructions in the
literature accompanying this
unit.
CAUTION: To reduce the risk of
electric shock, do not remove
cover (or back).
No User-serviceable parts inside.
Refer servicing to qualified ser-
vice personnel.
Technical specifications, features and the use
thereof are subject to change without notice.
For the US-market only!
NOTE: This equipment has been tested and
found to comply with the limits for a class B
digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful inter-
ference in a residential installation.
This equipment generates, uses and can ra-
diate radio frequency energy and, if not in-
stalled and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the inter-
ference by one or more of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equip-
ment and receiver.
– Connect the equipment into an outlet on a
circuit different from that to which the re-
ceiver is connected.
– Consult the dealer or an experienced radio/
TV technician for help.
For the Canadian market only:
This class B digital apparatus meets all require-
ments of the Canadian Interference-Causing
Equipment Regulations.
This product fulfils the conditions
stated in the EEU directives 89/336
and 73/23.