Bang & Olufsen BeoLink Passive - Setting-up Guide - Manual (Page 8)

8
>> Connections
BeoLink connections
In the main room: Connect the
Master Link cabel to the
socket marked MASTER LINK
on your main system, and run
the cable to the junction box.
In the link room: Connect the
Master Link cabel to the
socket marked MASTER LINK
on the BeoLink Passive am-
plifier box, and run the cable
to the junction box.
Inside the junction box: Join
the cables as explained in the
folder enclosed with the
box. The document contains
information of the many
possibilities of the box and
how to join the cables.
Loudspeaker connections
Connect your passive loud-
speakers to the sockets marked
SPEAKERS L – R (left and right
speaker, respectively) on the
amplifier box.
The socket marked POWER
LINK should not be used in a
BeoLink Passive setup.
Mains connection
Plug the mains lead into
the socket marked ~ on the
BeoLink Passive amplifier box
and secure it with the clamp
(G).
MASTER LINK IR POWER LINK SPEAKERS
R 8 Ω L
~
~
G
Connection
to the
main system
Main System Link System
Junction box