Baumfolder BaumCut 26.4 (For serials 78D1001 thru 78D1100) - Manual (Page 66)

5.0 Automatic Operation
Maintenance Cut Counter
Operation: Shows maintenance intervals.
Has been set to 100.000 cuts by manufacturer.
Counter starts at "0" or other preset amount and counts upward. After reaching
100.000, at every start-up, the operation display will read
OBSERVE MAINTENANCE SCHEDULE
Select maintenance cut counter
Set counter:
1. Enter number of cuts via keyboard
2. Press key "Enter"
< automatic change of image back to selection image >
K5B - 6