Baumfolder BaumCut 26.4 (For serials 78D1001 thru 78D1100) - Manual (Page 75)

5.0 Automatic Operation
Block Programming
Enter Edge trim
10. Enter "Edge trim width X", confirm with key
11. Enter "Edge trim width Y", confirm with key
12. Menu 1 Final size entry
2 Sheet size tables
13. e.g.: "Enter final size"
14. Enter "Final size X", confirm with key
15. Enter "Final size Y", confirm with key
or
16. e.g.: "Sheet size tables"
17. Select desired sheet size by means of the cursor keys and confirm with
key
Menu 1 Label orient. OK
2 Turn material
18. Make selection
19. Finish entry with key "Enter"
< Program data display appears with a graphic window of the current
Block Programming variation (visible sheet orientation with order start),
see also page K5D - 3 "Graphics OFF"
K5B - 15