Brother DCP-8045D - Manual (Page 77)

IMPORTANT INFORMATION 6 - 4
Laser safety
This equipment is certified as a Class I laser product under the U.S.
Department of Health and Human Services (DHHS) Radiation
Performance Standard according to the Radiation Control for Health
and Safety Act of 1968. This means that the equipment does not
produce hazardous laser radiation.
Since radiation emitted inside the equipment is completely confined
within protective housings and external covers, the laser beam
cannot escape from the DCP during any phase of user operation.
FDA regulations
U.S. Food and Drug Administration (FDA) has implemented
regulations for laser products manufactured on and after August 2,
1976. Compliance is mandatory for products marketed in the United
States. The following label on the back of the DCP indicates
compliance with the FDA regulations and must be attached to laser
products marketed in the United States.
WARNING
Use of controls, adjustments or performance of procedures other
than those specified in this manual may result in hazardous invisible
radiation exposure.
Manufactured:
BROTHER CORP. (ASIA) LTD.
BROTHER BUJI NAN LING FACTORY
Gold Garden Industry, Nan Ling Village, Buji, Rong Gang,
Shenzhen, China.
This product complies with FDA radiation performance standards,
21 CFR Subchapter J.