Brother DCP-8045D - Manual (Page 75)

IMPORTANT INFORMATION 6 - 2
WARNING
■
This DCP has been certified to comply with FCC standards,
which are applied to the USA only. A grounded plug should
be plugged into a grounded AC outlet after checking the
rating of the local power supply for the DCP to operate
properly and safely.
■
For protection against the risk of electrical shock, always
disconnect all cables from the wall outlet before servicing,
modifying or installing the equipment.
Important
Changes or modifications not expressly approved by Brother
Industries, Ltd. could void the user’s authority to operate the
equipment.
WARNING
Brother cannot accept any financial or other responsibilities that
may be the result of your use of this information, including direct,
special or consequential damages. There are no warranties
extended or granted by this document.
Important – about the interface cable
A shielded interface cable should be used to ensure compliance with
the limits for a Class B digital device.